SGI Origin 350が我が家に来た件

TheoがSGI Origin 350を私に買い与えてくださいました。
こんな子：
だがしかし、正常に起動してこない。もともとジャンクに近い扱いで大幅に安くしてもらったものなので、どこか壊れているかもしれない…。
どうしたものだろうか。SCSIが逝っているように見えるのだけれど。
SGI SN1 L1 Controller


Firmware Image A: Rev. 1.42.6, Built 04/21/2006 13:45:16








001c03-L1>INFO: 001c03 will power up system in 85 seconds...


INFO: 001c03 will power up system in 80 seconds...


INFO: 001c03 will power up system in 75 seconds...




entering console mode  001c03 CPU0, <CTRL_T> to escape to L1

Starting PROM Boot process  





IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004

Testing/Initializing memory ...............		DONE

Copying PROM code to memory ...............		DONE

Discovering local IO ......................		serial_dma: Timeout on uartA dma ....

serial_dma failed:  

RSLT serial_dma     FAIL                diag_rc = 75                            

diag_serial_dma: /hw/module/001c03/xtalk/15: FAILED

DONE

Discovering NUMAlink connectivity .........		

Local hub NUMAlink is down.

*** Local network link down

DONE

Found 1 objects (1 hubs, 0 routers) in 5887 usec

Waiting for peers to complete discovery....		DONE

No other nodes present; becoming global master

Global master is /hw/rack/001/bay/03

\\\\Intializing any CPUless nodes..............		\\DONE

\Checking partitioning information .........		DONE

No other nodes present; becoming partition master

\Local slave entering slave loop

Loading BASEIO prom .......................		DONE



BASEIO PROM Monitor SGI Version 6.210  built 02:30:38 PM Aug 26, 2004 (BE64)

2 CPUs on 1 nodes found.



NVRAM checksum is incorrect: reinitializing.

Automatic update of PROM environment disabled

Graphics diagnostics



Installing PROM Device drivers ............             

On-board (IO9) tigon3 1000BaseT interface

Base I/O Ethernet set to /dev/ethernet/tg0

Probing IOC4 ATA adapter 2

IOC4 RevId = 83

ide_poll: Timeout waiting for sema to unlock. 

scsi_dma: DMA test failed .... 

scsi_dma failed:  

RSLT scsi_dma       FAIL                diag_rc = 69                            

diag_scsi_dma: /hw/module/001c03/xtalk/15/pci/3: FAILED



Walking SCSI Adapter 0, (pci id 3)

1timeout on adapter 0 target 1

  tm0=0xec66988f8, tm1=0xec6698903, timeout=0xb

- 2Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 2

  tm0=0xec6698914, tm1=0xec669891f, timeout=0xb

- 3HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 3

  tm0=0xec6698921, tm1=0xec669892c, timeout=0xb

- 4HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 4

  tm0=0xec669892e, tm1=0xec6698939, timeout=0xb

- 5HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 5

  tm0=0xec669893b, tm1=0xec6698946, timeout=0xb

- 6HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 6

  tm0=0xec6698948, tm1=0xec6698953, timeout=0xb

- 7HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 7

  tm0=0xec6698955, tm1=0xec6698960, timeout=0xb

- 8HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 8

  tm0=0xec6698962, tm1=0xec669896d, timeout=0xb

- 9HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target 9

  tm0=0xec669896f, tm1=0xec669897a, timeout=0xb

- 10HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target a

  tm0=0xec669897c, tm1=0xec6698987, timeout=0xb

- 11HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target b

  tm0=0xec6698989, tm1=0xec6698994, timeout=0xb

- 12HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target c

  tm0=0xec6698996, tm1=0xec66989a1, timeout=0xb

- 13HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target d

  tm0=0xec66989a3, tm1=0xec66989ae, timeout=0xb

- 14HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target e

  tm0=0xec66989b0, tm1=0xec66989bb, timeout=0xb

- 15HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 0 target f

  tm0=0xec66989bd, tm1=0xec66989c8, timeout=0xb

- = 0 device(s)





Walking SCSI Adapter 1, (pci id 3)

1HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 1

  tm0=0xec66989ca, tm1=0xec66989d5, timeout=0xb

- 2HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 2

  tm0=0xec66989d7, tm1=0xec66989e2, timeout=0xb

- 3HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 3

  tm0=0xec66989e4, tm1=0xec66989ef, timeout=0xb

- 4HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 4

  tm0=0xec66989f1, tm1=0xec66989fc, timeout=0xb

- 5HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 5

  tm0=0xec66989fe, tm1=0xec6698a09, timeout=0xb

- 6HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 6

  tm0=0xec6698a0b, tm1=0xec6698a16, timeout=0xb

- 7HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 7

  tm0=0xec6698a18, tm1=0xec6698a23, timeout=0xb

- 8HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 8

  tm0=0xec6698a25, tm1=0xec6698a30, timeout=0xb

- 9HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target 9

  tm0=0xec6698a32, tm1=0xec6698a3d, timeout=0xb

- 10HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target a

  tm0=0xec6698a3f, tm1=0xec6698a4a, timeout=0xb

- 11HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target b

  tm0=0xec6698a4c, tm1=0xec6698a57, timeout=0xb

- 12HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target c

  tm0=0xec6698a59, tm1=0xec6698a64, timeout=0xb

- 13HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target d

  tm0=0xec6698a66, tm1=0xec6698a71, timeout=0xb

- 14HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target e

  tm0=0xec6698a73, tm1=0xec6698a7e, timeout=0xb

- 15HCCR_HOST_INT never cleared

Set Device queue Parameters failed

HCCR_HOST_INT never cleared

MBOX_CMD_SET_TARGET_PARAMETERS command failed

timeout on adapter 1 target f

  tm0=0xec6698a80, tm1=0xec6698a8b, timeout=0xb

- = 0 device(s)



Initializing PROM Device drivers ..........             

 Initializing Base I/O Ethernet Interface...Failed.  MII Status Register = 0x7949

Done.

 ---------------Interface Configuration Summary----------------

 ASIC|Revision|MAC Address       : 5701|B5|08:00:69:11:e6:48

 Link Negotiation|Advertisement  : On|<H10 F10 H100 F100 F1000>

 Link|Speed|Duplex|Rx/Tx FlowCtrl: Down|10|Half|Off/Off

 --------------------------------------------------------------

DONE

Checking hardware inventory ...............              DONE



**** System Configuration and Diagnostics Summary ****

CONFIG:

        No. of NODEs enabled    = 1

        No. of NODEs disabled   = 0

        No. of CPUs enabled     = 2

        No. of CPUs disabled    = 0

        Mem enabled             = 2048 MB

        Mem disabled            = 0 MB

        No. of RTRs enabled     = 0

        No. of RTRs disabled    = 0



DIAG RESULTS:

        /hw/module/001c03/xtalk/15: IOC4 failed diag

                Reason: Failed serial DMA test.

        /hw/module/001c03/xtalk/15: SCSI failed diag

                Reason: pci id 3 Failed SCSI DMA test.

**** End System Configuration and Diagnostics Summary ****





System Maintenance Menu



1) Start System

2) Install System Software

3) Run Diagnostics

4) Recover System

5) Enter Command Monitor



Option?